|PCIe Standard||Gen2 and Gen1 (also compatible with Gen3 and Gen4, running at Gen2 speeds)|
|Plug and play||Compliant|
|Physical connector||x1 and x4 PCIe edge connectors (card can be flipped)|
|PCIe Transfer modes||DMA - Direct memory access|
|Device memory||96KB of high speed integrated LSRAM|
|ADC Sample Rate||1MHz per channel, dual channel (up to 2 million voltage measurements per second)|
|No. of Channels||2 (up to 2 channels can be measured simultaneously)|
|No. of Measurement Sources||6 (Voltage rails & Temperature)|
|Voltage Rails Monitored||12V PCIe, 3.3V PCIe, 3.3Vaux, 12V PSU, 5V PSU|
|ADC Resolution||12 bits|
|Dimensions Package dimensions||85mm x 45mm x 12mm (3.4 x 1.8 x 0.5 inches) 140mm x 69mm x 20mm (5.5 x 2.7 x 0.8 inches)|
Yellow LED = TX Activity
Green LED = RX Activity
Red LED = I/O Error
Orange LED = Sleep
Green LED = PCIe Gen2/3
Yellow LED = Misc
Green LED = Loopback Mode
Yellow LED = Benchmark Mode
Orange LED = Oscilloscope Mode
|EMC standards||AS/NZS 3548:1995, EC.|
|Storage Temperature||-30 ºC to 80 ºC|
|Usage Temperature||0 ºC to 70ºC|
|Max speed||5 Gbits/sec per lane|
|RoHS (Lead free)||Yes|
|C-Tick Compliance Tested||Yes|
4-pin female MOLEX to 15-pin male SATA adapter for connecting the on-board MOLEX to PSU SATA outputs.
PCIeTest software and Windows Drivers
PCIe Test Card user guide and instructions
Windows 32bit & 64bit: Windows 7, 8 & 10 are supported.
Linux: Compatible with BurnInTest for Linux V3.4 and above. See here for detailed list of supported Linux distributions.
Windows XP, Vista and Mac are not supported.
In order to use the PCIe Test Card you also need one of the following 3 software applications.
A) BurnInTest Professional v8.1 or higher
B) BurnInTest for Linux V3.4 or higher
C) The free stand alone PCIeTest software for Windows. Download here
For a card that is capable of testing Gen3, Gen2 and Gen 1 (also compatible with Gen4 and Gen 5, running at Gen3 speeds), we have a PCIe Gen3 Test Card available.